Aero-naut Model Ship Kits

Clipper

Add to cart
aero-naut (aeronaut)
AN3002/00
4012230093321

Part No.: AN3002/00
Scale: n/a
Length: 480mm
Beam: 97mm
Height: 610mm

Clipper - Sailboat

The kit is very carefully prepared, with the result that no tools at all are required to build the model; all the wooden parts are die-cut, and the aluminium tubing for the mast and boom is already cut to the correct lengths. Pre-formed wire fittings are provided, ready for sliding onto the aluminium tubes.
All you need to construct the model is modelling pins and adhesive tape. The kit includes all the wooden parts and fittings required to build the boat, plus rudder, glue and comprehensive building instructions in German, English, French, Italian and Spanish.

Bella

Add to cart
aero-naut (aeronaut)
AN3009/00
4012230102641

Part No.: AN3009/00
Scale: n/a
Length: 810mm
Beam: 235mm
Mast Height: 1050mm
Foresail Area: 8.7dm2
Mainsail Area: 15.4dm2
Displacement: 2600g

Bella - Sailboat
The kit contains:
Comprehensive building instructions, and all the wooden parts, fittings and sails required to build the boat. Most parts are laser-cut, some die-cut.

Hansajolle

Add to cart
aero-naut (aeronaut)
AN3011/00
4012230090221

Part No.: AN3011/00
Scale: 1:6.5
Length: 940mm
Beam: 260mm
Draught: 170mm
Mast Height: 1050mm
Foresail Area: 10dm2
Mainsail Area: 25dm2
Weight: 1400g

Hansajolle - Hansa Dinghy
The model can be operated with or without radio control system to the builder's preference, although the kit is prepared for the installation of an RC system. The internal fittings consist of precision-cut plywood parts which are fitted and glued together inside the vacuum-moulded hull. The deck is supplied accurately pre-cut, with printed planking

The kit contains:
Comprehensive staged building instructions, machine-trimmed vacuum-moulded plastic hull, sails, all wooden parts including deck, bulkheads, mast, cabin and rudder, plus all fittings and accessories.

Bellissima

aero-naut (aeronaut)
AN3012/00
4012230105062

Part No.: AN3032/00
Scale: n/a
Length: 1200mm
Beam: 280mm
Mast Height: 1370mm
Foresail Area: 14.8dm2
Mainsail Area: 29.1dm2
Displacement: 4700g

Bellissima - Sailboat

Bellissima is an enlarged version of our Bella sailing boat. Construction of the two models is identical, but the elegant Bellissima is bigger all round.
The kit contains:
The model kit contains comprehensive building instructions, plus all the wooden parts, fittings and sails required to build the model. The parts are laser-cut, with some die-cut.
Please note, if you wish to sail the Bellissima you will also need the optional keel ballast weight.

TEMPORARILY OUT OF STOCK - New stock expected 1-2 weeks.

Bellissima Keel Ballast

Add to cart
aero-naut (aeronaut)
AN3012/10
4012230105222
Bellissima Keel Ballast

Keel ballast weight for the Bellissima Yacht - an essential accessory for anyone wishing to sail their model.

Jonny

Add to cart
aero-naut (aeronaut)
AN3030/00
4012230112374

Part No.: AN3030/00
Scale: 1:32
Length: 990mm
Beam: 308mm
Height: 675mm
Draught: 110mm

Jonny - Harbour Tug
The kit contains:
GRP hull with integrated rubbing strakes, laser-cut wood, ABS and Vivak parts, set of photo-etched parts, comprehensive set of fittings with water cannons, winches etc. as well as detailed building instructions.
The kit also includes many functional parts like winches, water cannons, working lights etc. and a set of more than 100 photo-etched parts to achieve a high level of detail. Working and navigation lights can be equipped with LEDs to add various lighting options to your model.

Torben

Add to cart
aero-naut (aeronaut)
AN3031/03
5055426722468

Part No.: AN3032/00
Scale: n/a
Length: 730mm
Beam: 235mm
Height: 480mm

Torben - Harbour Tug

The kit contains:
Fittings, building plans and English Instructions.

Kit is supplied complete with fitting set.

Kalle

aero-naut (aeronaut)
AN3032/00
4012230001609

Part No.: AN3032/00
Scale: 1:33
Length: 737mm
Beam: 220mm
Height: 480mm

Kalle - Steam Tug

The kit contains:
A construction plan with detailed instruction booklet in English, German, French and Norwegian, deep drawn pre-fabricated hull and superstructure, pre formed parts, shaft, stern tube and brass propeller, boat stand and all fittings and other accessories.

TEMPORARILY OUT OF STOCK - New stock expected 1-2 weeks.

Pilot

Add to cart
aero-naut (aeronaut)
AN3046/00
4012230105413

Part No.: AN3046/00
Scale: 1:25
Length: 715mm
Beam: 200mm
Weight: 2400 - 3000g

Pilot - Pilot Boat
The kit contains:
All the laser-cut ABS parts required to build the model, Depron jig, fittings, rubbing strake, propeller shafts, rudders, plus the reflectors and LEDs for the searchlights. The kit also includes an etched German silver parts set containing more than one hundred components. These include railing stanchions, searchlights, working door hinges, control panel instruments and much more.

Ramborator

Add to cart
aero-naut (aeronaut)
AN3048/00
4012230103167

Part No.: AN3048/00
Scale: n/a
Length: 455mm
Beam: 200mm
Height: 395mm

Ramborator - Springer Tug
The kit contains:
All plywood parts required to build the model, tabbed for accurate glued joints. The kit also includes strip material, propeller shaft and rudder, and a fittings set. The full-colour instructions include many stage drawings. A fittings set which helps to produce a semi-scale model of attractive appearance.

Ramboline

Add to cart
aero-naut (aeronaut)
AN3048/01
4012230104966

Part No.: AN3048/01
Scale: n/a
Length: 1188mm
Beam: 329mm
Cargo Area Width: 200mm
Cargo Area Length: 1117mm
Capacity: 14kg

Ramboline - Barge

The model is of ABS construction. All the ABS parts are supplied accurately laser-cut, and all parts are keyed together by tab and slot before being glued. The watertight hatches for the RC components and bow thruster are retained by screws.

The kit contains:
All the parts required to build the model, fittings and building instructions.

Spitfire

Add to cart
aero-naut (aeronaut)
AN3052/00
4012230105260

Part No.: AN3052/00
Scale: 1:5.2
Length: 585mm
Beam: 260mm
Weight: 1200g

Spitfire - Outboard Hydro
The kit contains:
All the wooden parts, fittings, covering and jig, plus etched German silver components.

Jenny

Add to cart
aero-naut (aeronaut)
AN3055/00
4012230102634

Part No.: AN3055/00
Scale: 1:10
Length: 730mm
Beam: 198mm
Weight: 1500g

Jenny - Sports Boat

The model features a hard-chine hull, and is of all-wood construction (plywood and mahogany). All the wooden parts are laser-cut or die-cut, require the minimum of trimming, and can be glued together immediately.
The engine hatch and the whole cockpit are removable, providing convenient access to the power train and electrical system.

The kit contains:
All the wooden parts required to build the model, fittings such as propeller shaft and rudder.

Anna 3

Add to cart
aero-naut (aeronaut)
AN3076/00
4012230112381

Part No.: AN3076/00
Scale: 1:20
Length: 700mm
Beam: 260mm
Draught: 65mm

Anna 3 - Fishing Cutter

The kit contains:
Vacuum-formed ABS hull, laser-cut and engraved deck, laser-cut wood parts (mahogany plywood, birch plywood, aluminium tubes for masts and booms, material for rigging, propeller shaft and comprehensive instructions.
The kit also includes working search light, navigation lights and working lights, anchors, blocks, cleats, winch kit, pulleys, life belts, port holes and many more small parts as well as set of approximately 100 photo-etched parts.
Detailed instructions explain how to build the model. There are graphics and text to explain each building step, just as it has become the standard for all modern models by Aero-naut.

Queen

aero-naut (aeronaut)
AN3080/00
4012230097954

Part No.: AN3080/00
Scale: n/a
Length: 950mm
Beam: 315mm

Queen - Sports Boat

This model is an all-wood kit based on a hard-chine hull, which is a basic requirement for fast, straightforward building. All the wooden parts are highly pre-fabricated, and are ready to be glued in place after a quick check for fit. The basic method of assembly is the same as that of the Classic Sports boat and Diva: the hull is built over a die-cut Depron sheet jig into which the bulkheads are inserted. Fitting the keel and the two fore-and-aft bearers completes the basic bulkhead framework.

The kit contains:
All the wooden parts required to build the model, together with fittings and propeller shaft.

 

TEMPORARILY OUT OF STOCK - New stock expected 1-2 weeks.

Princess

Add to cart
aero-naut (aeronaut)
AN3081/00
4012230101163

Part No.: AN3081/00
Scale: 1:8
Length: 950mm
Beam: 315mm

Princess - Sports Boat

The kit is of all-wood construction (plywood and mahogany) with a hard chine hull, which is the basic requirement for simple, fast assembly. All the wooden parts are very highly pre-fabricated, laser-cut or die-cut, and can be glued together after just a brief trial-fit and final trim. The hull is built on a die-cut Depron sheet jig which defines the position of the components; the builder can therefore immediately start constructing the boat. The hull is the same design as used for our Queen, which has proved highly successful. The open cockpit area takes the form of a complete, watertight cradle which can be removed to provide generous access to the power system and RC components.

The kit contains:
All wooden parts required to build the boat, fittings and propeller shaft.

Victoria

Add to cart
aero-naut (aeronaut)
AN3082/00
4012230103181

Part No.: AN3082/00
Scale: 1:20
Length: 700mm
Beam: 203mm
Weight: 1500g

Victoria - Motor Yacht

All the wooden parts are accurately laser-cut and designed for ease of construction, with the result that the boat can be built in about twelve hours excluding drying time for the glue and sealer. The completed model is finished with clear boat lacquer.

The kit contains:
All wooden parts required to build the model, fittings, propeller shaft and rudder.

Capri

Add to cart
aero-naut (aeronaut)
AN3083/00
4012230105079

Part No.: AN3083/00
Scale: n/a
Length: 700mm
Beam: 203mm
Weight: 1500mm

Capri - Sports Boat

The cockpit is a self-contained shell which can be removed from the boat in one piece to provide access to the interior of the hull.

The kit contains:
All the wooden parts required to build the boat, metal fittings, propeller shaft, rudder and shaft coupling.

Marina

Add to cart
aero-naut (aeronaut)
AN3084/00
4012230111865

Part No.: AN3084/00
Scale: n/a
Length: 670mm
Beam: 230mm
Weight: 1600g

Marina - Runabout

Outboard motors (not included) like our Aqua-Race 50 or Aqua-Race 60 with an output of ca. 300 W provide the model with ample power not only for a comfortable cruising speed but for an exciting performance. Equipped with a 2-3s Li-Po the Marina will give you all the fun you are looking for.

The kit contains:
Laser-cut parts and mahogany veneer for hull and deck, the proven aero-naut jig, photo-etched parts, synthetic leather for the seats and required hardware. Detailed and illustrated building instructions complete the kit.

Mowe 2

Add to cart
aero-naut (aeronaut)
AN3091/00
4012230089140

Part No.: AN3091/00
Scale: n/a
Length: 495mm
Beam: 168mm
Height: 350mm
Weight: 700g

Mowe 2 - Fishing Boat

Möwe 2 is an all-woof construction. All parts are laser-cut and require a minimum of work. The hull uses a new material called A-Tex for light-weight construction and remarkable strength. Mast booms and exhaust tube are aluminium and definitely look their part on this small model boat. A separate kit within the kit is the winch, which is built-up of precisely cut plywood parts and looks like the real thing when painted. Three wood boxes in which caught fish can be stored, emphasize the model´s realistic looks.

The kit contains:
Detailed building instructions in German and English languages with graphics and step-by-step instructions, parts list, all wood parts required to build the model (plywood, A-Tex), Aluminium tubes for mast, booms and exhaust pipe, electric motor, prop shaft with prop, rudder, flag and glue.

Classic

Add to cart
aero-naut (aeronaut)
AN3092/00
4012230089133

Part No.: AN3092/00
Scale: n/a
Length: 540mm
Beam: 176mm

Classic - Sports Boat

The deck serves as a building jig, and the bulkheads interlock with it. The hull floor and sides are die-cut from thin plywood, and all the other model components are pre-cut or die-cut. The only tools required are a pair of scissors, a drill, screwdriver, clothes pegs, pins and adhesive tape

The kit contains:
All the wooden parts required to build the model, propeller shaft, propeller, rudder, glue and comprehensive building instructions in various languages.

Diva

Add to cart
aero-naut (aeronaut)
AN3093/00
4012230094557

Part No.: AN3093/00
Scale: n/a
Length: 580mm
Beam: 180mm

Diva - Cabin Cruiser

The only tools required are: scissors, drill, screwdriver, pins, clothes pegs, adhesive tape and glasspaper (sandpaper).

The kit contains:
All parts are die-cut for fast assembly. In addition to the building instructions the kit also includes a detailed plan, all wooden parts and fittings, shaft and propeller, and a jig for assembling the bulkheads, which greatly simplifies construction.

Graf Spee

Add to cart
aero-naut (aeronaut)
AN3600/03
5055426722505

Part No.: AN3600/03
Scale: 1:200
Length: 940mm
Beam: 108mm

Graf Spee - "Panzerschiff" (armoured ship)

The model was designed to a scale of 1:200, using shipyard documents.
The kit contains the finished plastic hull which substantially shortens the construction time. The drive is made with two electric motors. The hull dimensions do permit the installation of multi-channel remote control.

The kit contains:
Detailed manual with building process in German, English, French, Spanish and Italian, plastic hull, additional plan for completion of the hull, deck, rudder, wood and cardboard sections, propellers with shafts and tubes.
The kit is supplied complete with detailed fitting set which features portholes, anchors, anchor cables, headlights, flag-pole, hawse pipes, anchor capstans, life-boats, traffic boats, anti-aircraft artillery, triple turrets, double gun-carriage, torpedo tubes, rangefinder, Arado 196, masts (brass tubes, steel-wire), railings, cranes, etc..

Tirpitz

Add to cart
aero-naut (aeronaut)
AN3619/03
5055426722512

Part No.: AN3600/03
Scale: 1:200
Length: 1255mm
Beam: 180mm

Tirpitz - Battleship

The model was designed to a scale of 1:200.
The kit contains the finished plastic hull which substantially shortens the construction time.

The kit contains:
Detailed manual with building scheme in German, English, French, Spanish and Italian, plastic hull, additional plan for completion of the plastic hull, deck, rudder, wood and cardboard sections, propellers with shafts and tubes.
The kit is supplied complete with detailed fitting set which features portholes, anchors, anchor cables, headlights, flag-pole, hawse pipes, anchor capstans, life-boats, traffic boats, anti-aircraft artillery, triple turrets, double gun-carriage, torpedo tubes, rangefinder, Arado 196, masts (brass tubes, steel-wire), railings, cranes, etc.

Bismarck

aero-naut (aeronaut)
AN3620/03
5055426722529

Part No.: AN3620/03
Scale: 1:200
Length: 1255mm
Beam: 180mm

Bismarck - Battleship

The model was designed to a scale of 1:200, using shipyard documents.
The kit contains the finished plastic hull which substantially shortens the construction time. The three propellers can be driven by three electric motors or a single electric motor with transmission. The hull dimensions do permit the installation of multi-channel remote control.

The kit is supplied complete with detailed fitting set which features portholes, anchors, anchor cables, headlights, flag-pole, hawse pipes, anchor capstans, life-boats, traffic boats, anti-aircraft artillery, triple turrets, double gun-carriage, torpedo tubes, rangefinder, Arado 196, masts (brass tubes, steel-wire), railings, cranes, etc.

 

TEMPORARILY OUT OF STOCK - New stock expected 1-2 weeks.

!